Draftosaurus game piece drafting boxes

This is a remix of the drafting boxes from tjdesign. The magnet depressions in the original is not a typical size so this is set up for a press fit on 6mm x 2mm magnets. No glue needed, just press hard. It also allows you to print this in dual color with the text and alternate color without the use of supports. The depressed “DRAFTOSAURUS” is depressed .2 mm so if you print these lids at .2 layer height it should not require any supports and print flush with the rest of the lid when printed face down on the print bed. 

This makes a magnet depression for a 6mm x 2mm magnet as well as make it so you may print this in dual color with the text and alternate color without the use of supports. The depressed “DRAFTOSAURUS” is depressed .2 mm so if you print these lids at .2 layer height it should not require any supports and print flush with the rest of the lid when printed face down on the print bed.