AT Motherboard standoff. (BabyAT)

So working on motherboards are fun and all.. But one annoying thing is the bracket on the expansion cards. Since they extend below the bottom surface of the board, they will pop out unless you mount it on.. This! 

This standoff will keep a motherboard a bit off the table, so you can “safley” have your cards inserted.

No mousepads or wooden boards needed.. ;)

Use standard screws you find on any PC case. Fine or coarse, your choice.

Four small holes added,  if you want to mount it more secure.

(Small enough to be printed on the Bambu's 256x256 bed)

ATX-version? Heck yes!

https://www.printables.com/model/1043698-atx-motherboard-standoff

Now there's one for mini ITX!

https://www.printables.com/model/1067823-mini-itx-motherboard-standoff