This simple coin dispenser for wall mounting is designed so that coins can be easily removed, but the bottom coin does not fall out unintentionally, for example when the coin dispenser is attached to a cupboard door or flap. Available in 2€, 1€ as well as 50, 20 and 10 cent sizes fitting at least 25 or 50 pieces each.
No support structure is required.
The fastening is done with up to 4 screws, e.g. 4x10 wood screws, so not too long, to prevent the screws from popping out on the back of thinner boards. Don't underestimate the weight of the coins with such small screws e.g. in chipboard, so I would always use all 4 screws in such cases.
The author marked this model as their own original creation.