Match Shooter with grip

This was such a cool fun idea that I needed one for my huge fingers! 

I added a hand grip and changed the orientation of the clip and trigger to vertical.  The cocking lever was enlarged and I also put a thumb brace on the top to help cock the lil sucker. Three triggers are included with different angles.  I found the High to work best and holds / lets go of the clip the best. ( I removed the lettering but only to help the face count while remixing -  the shooter design is fully uhltimate's!!)

The three parts Fit together in this order… The hand grip slides into the dovetail shaped grove in the shooters base, the trigger then presses into the base & grip on the upper left side.

The entire model can be press fit together but there may be difficulty pressing in the trigger.   The trigger needs to be fully seated to align with the clip so do your best to clean the mating faces, they will fit with a bit of scraping/cleaning of the parts.

I recommend printing with supports on each part and an inner/outer brim for the small ribs, thin hexagons and the slim trigger base.

-

Thanks Uhltimate! Very fun project 

*Hand Grip

*Vertical Trigger

*Enlarged Cocking levers

*Multiple Triggers