Whistle with Base

**** MAKE SURE SUPPORTS ARE SET TO TOUCHING BUILDPLATE ONLY, found out the hard way ****

I found the two original stl files and thought they were perfect! Upon printing them, they worked out well. However, it was difficult placing them together without having to buy a new whistle or melt the base to, sort of, fit the whistle inside. I was instead suggested to make a model of the two together, so here ya go!

They are printed as all one piece. I am still figuring out how to place a ball inside the whistle, but the straps worked perfectly around my hockey glove. You can buy stretchy straps or, like me, use your old hockey pant suspenders and convert them. There are two types, one is just the whistle and base added together. The second set, I have not printed yet, has a small roof placed in the whistle's middle to help keep a ball in…. if you can get one inside. 

I extended the snout of the original whistle so it wouldn't be too close to your face with the base added. I also combined the two models, adjusting the size of the whistle to better fit into the whistle holder base. The whistle holder then had to be modified to let the whistle sit a little further back, opening up the entry area for the bigger whistle to fit.