Crystal Dispaly Easel

Summary:
These versatile Crystal Display Easels provide a stable platform to showcase your Crystals. Available in multiple sizes, each easel is designed with two long and one short pillar to securely hold your crystals in place, ensuring an elegant display for any collection.

Description:
Enhance your Crystal display with custom-designed Easels that fit a variety of crystal arrangements. Each easel is precisely measured to offer stability and a clean, minimalistic look for your crystal showcase.

Dimensions:

• 100%: 50.8 mm x 50.8 mm x 18.29 mm (Filament: 2.09m, 6.18g, Time: 12m)
• 90%: 45.72 mm x 45.72 mm x 16.46 mm (Filament: 1.57m, 4.65g, Time: 9m)
• 80%: 40.64 mm x 40.64 mm x 14.63 mm (Filament: 1.03m, 3.05g, Time: 6m)
• 70%: 35.56 mm 35.56 mm x 12.8 mm (Filament: 0.74m, 2.19g, Time: 5m)
• 60%: 30.48 mm x 30.48 mm x 10.97 mm (Filament: 0.41m, 1.2g, Time: 3m)
• 50%: 25.4 mm x 25.4 mm x 9.14 mm (Filament: 0.26m, 0.76g, Time: 2m)
• All Six Sizes (Filament: 6.10m, 18.03g, Time: 39m)

Print Settings:

• Nozzle Diameter: 0.6mm
• Layers and Perimeters:
  • Layer Height: 0.3mm for standard layers
  • First Layer Height: 0.36mm to ensure strong adhesion to the build plate.
  • Vertical Shells (Perimeters): 7 for increased durability and watertightness.
  • Horizontal Shells:
    • Top Layers: 6 layers to ensure a solid, smooth finish.
    • Bottom Layers: 6 layers to prevent any leaks.
  • Minimum Shell Thickness:
    • Top: 1.2 mm
    • Bottom: 1.8 mm
  • External Perimeters First - Check
  • Fill Gaps - Check
• Infill:
  • Density: 15% to provide sufficient strength while minimizing material use.
  • Pattern: Grid for strong, even support.
  • Length of the Infill Anchor: 0.8 mm
  • Maximum Length of the Infill Anchor: 2.5 mm
  • Top Fill Pattern: Concentric
  • Bottom Fill Pattern: Monotonic Lines
    NOTE:  Fill patterns are a preference. To ensure proper suitable water retention use Rectilinear.
• Print Speed:
  • First Layer Speed: 20mm/s to ensure proper adhesion and foundation.
  • Perimeters: 170 mm/s
  • Infill: 200 mm/s
  • Support Material: 120 mm/s
  • Bridges: 40 mm/s
  • Gap Fill: 200 mm/s
• Support Material: None needed, designed to print without additional support.
• Filament Material: PLA+
• Infill/Perimeters Overlap: 20% for strong bonding and water resistance.

Notes:

• The easels are easily scalable, allowing customization in your slicing software to fit different crystal sizes.

If you appreciate my designs and find them inspiring, consider supporting my ongoing projects with a coffee. Your generosity helps me continue to learn, experiment, and share my passion with you. Buy me a coffee.