mountingplate for wallmounted devices, with cabe tie holes and cable strain relief (parametric design)

Devices which need screws in a wall to mount on, but it is difficult to place them? 

For small electric devices/computer accessories like

• home routers / gateways / CPE
• small network switches
• battery chargers

Requirement to be usable, it is to mount devices 

• 2 slotted screw holes on one back or lower side

Features of bracket

• exact distance of pins at first attempt
• height of pins exact to reduce rattle
• zip ties (horizontal and or vertical) can be looped around device after mounting
• hook on the bottom adds support and keeps zip tie in the right spot
• DC cable can be fixed on additional loop eye, for strain relief e.g. on barrel jack DC.

Why this model anyway?

• speeds up mounting in hard to reach spaces
• it may be difficult to place screws in the right distance and needs several attempts to adjust the their height for a tight fit
• cable ties allow even for inverted mounting (by 90° or under a table)
• need tight fit and no rattle, like in an RV? The bottom hook supports!
• some DC cables might be in risk of being pulled out. Use the strain relief: The hook can have an eye for a smaller cable tie
• parameters are printed on a label automatically for later reprint or tweaking
• add our own text in the top of the label, e.g. to keep track which bracket for what device, in case you print a selection of brackets at once.

Preset File/Customizer

• unzip .json file, 
• name must be exact the same as .scad file
• place it alongside the .scad file in the directory before starting
• activate Parametrisizer: In the top bar in the window list select “Customizer”

Printing

• prints without support
• 3 outer walls recommended, 60% infill is reasonable (during tests we broke/bent devices before the printed part gave up)

Other models? 

• feel free to add your measurements, we will try to maintain updated json files with presets.
• OpenSCAD source code included, easy to modify 

Includes pre-rendered STL files:

1. wall bracket for AVM Fritzbox FB3490
2. wall bracket for AVM Fritzbox FB7270v3
3. wall bracket for AVM Fritzbox FB7490
4. wall bracket for AVM Fritzbox FB7530
5. wall bracket for AVM Fritzbox FB7590
6. wall bracket for Asus RT-AC57U
7. wall bracket for D-Link DGS-105c2
8. wall bracket for FAST FW300Rv9
9. wall bracket for Netgear GS108Ev2
10. wall bracket for Netgear R6120
11. wall bracket for TP-Link Archer C50
12. wall bracket for TP-Link Archer C6v2
13. wall bracket for TP-Link TL-SG1008D
14. wall bracket for TP-Link TL-SG108Ev5
15. wall bracket for TP-Link TL-WR741NDv2
16. wall bracket for TP-Link TL-WR841v11
17. wall bracket for TP-Link TL-WR841v8
18. wall bracket for TP-Link TL-WR841v9
19. wall bracket for TP-Link TL-WR941v2
20. wall bracket for TP-Link WR-1043NDv1
21. wall bracket for Totolink X5000R
22. wall bracket for Ubiquiti UBNT ER-X