Numerucation - Number education set

I designed this tool/toy for kids aged 5-8 to learn basic numbers, counting, operators and develop their motor skills (pick and place objects with hands).

It is designed so adult fingers can pick blocks also, either from base or on it's own.

Bases are designed for 3, 5, 7, 10, 12 and 14 blocks wide so it can be printed on MK4 or similar beds.

You can print whatever number of sets of numbers you want.

I recommend first print small "base 3" and 1 set of numbers to try it out.

Designed to set color switch at 3,2mm height (last two layers) during slicing so numbers will be of different color. Ideally with contrasting colors.

My print settings:

- printer: Prusa MK4
- layer height: 0.2mm
- sheet: Smooth PEI sheet
- nozzle diameter: 0.4mm
- print orientation: as on STLs
- material: PLA (bronze and white)
- supports: not needed
- perimeters: 3
- solid layers (top/bottom): 5/4
- color change at 3,2mm height (last 2 layers) with contrasting color

Feel free to support me on Ko-Fi https://ko-fi.com/kutilman
I can also sell my source files if you want to save some time designing variation.

Contact me here or via email on https://juraj.mriso.com