Tupper Spiralizer Thermomix adapter

This is a Adapter to use the Tupper Spiralizer with your Thermomix. Put it onto the knife of your Thermomix like the Butterfly insert and use it anti-clockwise. Otherwise the two printed parts get loose and the sharp side of the knife will cut your spiralized vegetables.

I printed both parts upside down on PETG.

The Top part needs a little support on the cross section. The Bottom part will need little supports where the cross part of the Top part will fit in and fasten the two parts to one and a very small one on the knife lock part.

Please ask anything if something isn't clear how to print.