Lightweight Halloween Wall Bats

These are a couple of Halloween bat silhouette decorations designed to be lightweight and to be printed multiple times. A single bat at 100% scale is about 2 grams, and at 200% is about 10 grams. The bats are about 10mm or 4in long.

Feel free to optimize the print even further by choosing different layer heights, line widths, and wall counts. The model is 1.2mm tall which gives 6 layers at 0.2mm layer height. Depending on how flexible you want the print to be, I've been able to reduce the height of the print to get less than 1 gram per bat.

Printing Instructions (Standard):
I recommend PLA with 0.2mm layer height, 10% infill, 2 walls, and no supports. Each part is printed as oriented.

Please comment with any questions or specific requests.

Happy Printing!