T-Rex ( Hueforge )

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA PolyTerra Charcoal Black Transmission Distance: 0.3
PLA Protopasta Soda Green Transmission Distance: 16
PLA BambuLab Basic Brown Transmission Distance: 2
PLA BambuLab Basic Yellow Transmission Distance: 6

Swap Instructions:
Start with Charcoal Black
At layer #8 (0.72mm) swap to Soda Green
At layer #11 (0.96mm) swap to Brown
At layer #15 (1.28mm) swap to Yellow for the rest.