Island House with Lighthouse - Single Extruder

Island House, on the water, with Lighthouse.

Notes:

The various colors are achieved with 7 manual color shifts, so I just did some computer work nearby why it was printing so I could change the spools. It is around a 2-4 hour print, so it can be awhile to babysit.

 Provided model file is the intended scale.

 Photos show model printed on Prusa Mini+, 210c, 0.4mm nozzle, 0.20mm Quality, fw 6.0, input shaping off.

! This model can be quite difficult to remove the supports from if you're using grid supports, I don't know if organic/no supports would be better, you have been warned !

Filaments used:

• Prusament PLA Galaxy Silver
• Inland PLA Egyptian Blue
• Inland PLA True Green
• Overture PLA White

Story:

This is one of my favorite houses I ever made in the game Minecraft. It was built in creative mode on Pocket Edition, likely in 2014 or 2015. I first converted and printed it a year ago but it had some sections that were difficult to remove the support material from. So with this in mind, I recently went through and tried to mitigate problem areas. Supports are still difficult to remove though, you'll want pliers and flush cutters if you using grid style for sure. I now feel better releasing it for others to enjoy as I have. 

You would be welcome to use this model in a video or reel if you so desire, I just ask to be credited somewhere. Either the Printables model link or my YouTube channel.