I-2 Shape Filters

Introduction:

I saw the Star Mask by Tome Anderson: 

https://www.printables.com/model/778195-polaroid-star-mask-one-step

This inspired me to make one for the I-2 using different means and create more shapes. The vignette one can be used to create more moody photos while the circle and star are probably better for double exposures as they create a nice dark area for the next exposure. 

Features:

There is a cut-out for the light sensors to still be able to work.

There is an arrow that should be facing up when trying to screw this on the camera. Different printers, settings, and filaments may create slight variations, so it isn't exactly on that spot. It should be close, though.

There are two little cylinders on the sides that do no show up in photos and help with screwing and unscrewing the masks/filters.

Printing:

I recommend printing this at 0.20 mm resolution. It is quick and the threads fit well. If the slicer warns about overhangs and the print messes up, you can go to 0.15 mm, but the threads will be a bit finnicky.