PLA Temperature & Bridging Tower MK4S High Flow 0.4mm Nozzle GCode

All in One Temperature & Bridging Tower - PLA MK4S GCode. Specifically sliced for the latest MK4S version with the 0.4mm high flow nozzle (HF0.4) 

Uses the default PrusaSlicer 0.2mm STRUCTURAL preset as that is what you will most likely be printing with. Just send this file to your MK4S and print and the test will run automatically including the temperature changes. No need to slice yourself. 

Runs from 220C to 185C in 5C increments, starting with the highest temp to avoid blocking at lower temps. 

See my fast temp tower here.

Sliced for MK4S HF0.4mm nozzle