Minisforum DEG1 eGPU Dock Enclosure / Case / Shell
Description
PDFI have .3mf files with my settings I've used over at Makerworld.
To split the model into each individual object:
(In slicer) Right-click model → split → to object
Designed for a full size ATX PSU and a dual PCIe bracket GPU
GPU size restrictions in pictures
Both enclosure halves snap-fit together
PRINT SETTINGS I'VE USED:
Nozzle: 0.4mm
Layer Height: 0.2mm
(Feel free to experiment and change what you like)
Any setting not listed below are assumed to be default
Enclosure | ||
Material | ABS | I'd recommend a filament with higher heat resistance. I used ABS just because I had some lying around but PETG among others should be fine |
Walls | 3 |
|
Brim Type | Outer Brim Only | I used a brim because of the ABS |
Enclosure Handle | ||
Material | ABS | I used ABS |
Walls | 20 | The handle NEEDS to be strong. This essentially prints it at 100% infill concentrically |
PCIe Bracket Lock | ||
Material | PETG | can be whatever |
Dust Filters | ||
Material | PETG | can be whatever |
Top Shell Layers | 0 | required for infill pattern to be visible |
Bottom Shell Layers | 0 | required for infill pattern to be visible |
Sparse Infill Density | 50% | change to your desired infill pattern |
Sparse Infill Pattern | Triangles | change to your desired infill pattern |
Current Version: v1.1
v1 |
|
v1.1 | -Expanded oculink port to accommodate bigger oculink cables -Longer lugs on PCIe lock |
**I'm not certain if other Minisforum DEG1 eGPU docks are the same dimensions as mine. Result may vary. USE THE HANDLE ON THE ENCLOSURE AT YOUR OWN RISK. **
Tags
Model origin
The author marked this model as their own original creation.
