Gift Tags

Gift Tags

Original way to tag a present for Your beloved ones.

Is a name You need missing? Let me know in the comments!

You can print them in single colour or You can select a “color change” feature in the PrusaSlicer to change the background of the name tag, as You can see in the preview photo.

If You intend to print the blank version and write the name with a marker, You can print the tag with lower layer height (0.2-0.6mm in such, the printing time varies from 4 to 8 minutes/1 tag).

Print settings:
layer height 0.2mm
Nozzle diameter: 0.4mm
Ironing: enabled, top layer only (without ironing is the printing time just 11 minutes/1 tag)
Color change at height 0.6mm
For better results i recommend to place the tag on printbad with the name facing down and check wich way is bridging layed and set it's angle to reach shortest routes.

I hope You find these tag useful. 

PS: I would really appreciate if You press the like for me ;). Thank You and Marry Christmas!