Crack protectors for the enclosure door screwholes

The door panel of the enclosure are unfortunately somewhat sensitive and tend to crack at the points where there are screwholes, as soon a screw is tightened a little too much. This is because the force of the screw only acts on the very small surface of the screw head.

The spacers here distribute the force of the screw over a much larger surface, which helps to prevent cracking.

The spacers are available with thickness 2mm or 4mm, depending on what screws you plan to use.

For hinge/magnet parts:

• …_t2 → M3x10 Screws
•  …_t4 → M3x12 Screws

For the door handles you could use the existing M3x12 Screws


Parts to print for a full set:

• 4x doormagnet-…
• 4x doorhinge-…
• 2x doorlock-…