Skadis Boards Linker SnapLock

Koprov's original linker was great, but didn't quite “snap into place”. The V2 requires screws to lock into place, and I wanted to be able to put the connector in from behind so it's not as obvious.

I printed this in PETG at .2mm height, so the lip at the front is only a few layers. This allowed it to bend just enough that it friction fits at the end of the peg when pushed in. I don't know if this deformation will work with something brittle like PLA.

Updated Korpov's model to extend out to the full 5.86mm width of the boards, and added a lip to the end of the pegs. Now it actually “snaps” into place.

Also added chamfers to the edges for a cleaner look/feel.