3D wall art sculpture

I designed a wall sculpture inspired by Hershel Shapiro.

I used a 0.8mm nozzle with 0,4mm layer height from the prusa slicer settings. 15% infill worked fine for me.

https://www.etsy.com/de/shop/HerschelShapiro

You need:

1x Middle piece

6x Wall 1 edge

6x Wall 2 edge

6x Wall 2 corner (Print 5x Wall corner and 1x Wall 2 Wallmount)

                                          it includes a hole to mount it to the wall

12x Wall 3 corner

6x Wall 3 edge

18x Wall 4 corner

6x Wall 4 edge

I would recommend buying a 0,8mm nozzle as its not a high precision piece, and it will be printed 2 times as fast.

I aligned everything and glued the individual pieces together with superglue, maybe you find a better alternative.

The difference between corner and edge is in which direction the piece is looking.

Corner = The part looks towards a corner

Edge = The Part looks towards a edge

It took pretty much effort to design all of this. I appreciate if you like and share your makes :)