Canon M50 Battery Grip

Project developed thanks to Canon M50 CAD files, created by Luke Pamula

Parts List

• DR-E12 DC Coupler for Canon
• M3x10 Screws - 5 pcs
• M3x5x4 Insert Nuts - 5 pcs
• 1/4-20x8x8 UNC Insert
• 1/4" UNC (20)x3/4" (19mm) ANSI 18.2.1 (DIN 933) Screw
• 2S 7.4V 8A Li-ion 18650 Lithium Battery Charger Protection Board 8.4V
• 18650 Battery Pack Spring Contact - 2 pairs
• SAMSUNG INR18650-35E 3.6V 3500mAh - 2 pcs
• DC 3.0x1.1 Jack 3.0 x 1.1mm Power Supply Plug Connector With Cord
  
  Full instruction: https://kacperzawadzki.pl/en/blog/canongrip/
  
  Disclaimer: This tutorial is for educational purposes only. I do not
  take any responsibility for any damage to your camera, equipment,
  or personal injury that may occur during the assembly or use of
  this custom battery grip. Proceed at your own risk. Ensure you
  follow all safety guidelines, especially when working with electrical
  components and soldering. If you are unsure of any steps do not
  proceed installation