Neptune 4 Filament Sensor Mount

This is a direct mount for the filament sensor designed to work with PapaSchlumpf's remix of the Neptune 4 group-head (https://www.printables.com/model/719386-neptune-4-35015-printhead).

Features:
- Direct mounting of the filament sensor to the group-head
- Improved filament path
- Compatible with PapaSchlumpf's Neptune 4 printhead remix
- Easy installation

Print Settings:
- Material: ABS or PETG recommended
- Layer Height: 0.2mm
- Infill: 20-30%
- Supports: None required

Installation:
1. Remove the original filament sensor mount
2. Attach this new mount to the group-head using M3 screws
3. Install the filament sensor into the new mount
4. Route the filament through the new path

Notes:
- Ensure your printer is calibrated for accurate dimensioning
- Test fit before final installation

Files Included:
- STL file for the mount
- STEP file for easy modification

Remember to credit PapaSchlumpf for the original group-head remix this is designed to work with.

Tags: Neptune 4, filament sensor, printhead, upgrade, mod

(Note: You'll need to actually create the 3D model files, take photos of the printed part, and possibly create assembly instructions before publishing this on Printables