Meanwell LRS 100 series DIN Adapter using M4 Nuts no sides
M4 nuts to mount so no washers and m3 heatsets are needed
2
12
0
56
updated March 8, 2025
Description
PDFJust cut off the side part as its should be strong enough.
Also Tridents usually run inverted electronics ;)
Voron part is shared under the original License, see their github.
https://github.com/VoronDesign/Voron-Trident/blob/main/LICENSE
Tags
Model origin
The author remixed this model.
Differences of the remix compared to the original
cut off the unnecessary side part. 2x m3 should be good enough
