Lidded Filament Trash Bin

About the project

I designed these lidded bins when I started experimenting with different filament types. My priority was to avoid mixing waste materials as much as possible so they could be recycled easily. 

The lid serves two purposes: one is to facilitate the identification of each material, and the other is to prevent debris, such as dust, from contaminating the filament. This will make recycling easier.

Moreover, I wanted to keep them relatively compact so they would not take up too much of my precious project space. Once a bin is full, I put the waste material into a dedicated bag outside my work area.

Print Settings

• Filament: I recommend printing the bins and lids in PLA or PETG as they are cheap and durable enough. 
• Nozzle: 0.4mm or 0.6mm for a faster printing time
• Layer height: 0.3mm with a 0.4mm nozzle / 0.36mm with a 0.6mm nozzle
• Infill: 15% Gyroid
• Shell: 1mm
• Supports: None
• Adhesion: None

Future

Please give me some recommendations for adding more filament types to the lids! I would love to expand the list with composites and rarer filament types!