A2 Photo Booth

About

After sharing the original mini photo booth @LachlanA_166535 with my local Warhammer community, a member asked me if there was an option to use A2-sized paper for taking pictures of larger objects. So, I have adapted the original to fit A2-sized paper. In addition, I created a two-part rod that can be taken apart to allow the booth to be stored more easily when it's not in use.

Recommended print settings

Legs

Filament: PETG (I love HS/Rapid PETG)
Nozzle: 0.4mm (but a 0.6mm nozzle would be faster)
Layer height: 0.2-0.3mm
Infill: 25% Gyroid
Walls: 1mm
Supports: Tree
Adhesion: Brim
Print speed: 150mm/s

Rod(s)

Filament: PETG
Nozzle: 0.4mm
Layer height: 0.2mm
Infill: 25% Gyroid
Walls: 1.5-2mm
Supports: None
Adhesion: Brim
Print speed: 100mm/s

I have resized the model to fit an A2 sheet of paper and created a rod that can be taken apart for easier storage.