Orion Blasters Dan Pistol (BETA) T-pull Delete and Pump Grip Delete

You want to use the Dan Pistol exclusively with a pump grip and don't care about the t-pull? You want to use the Dan Pistol exclusively with the t-pull and don't care about the pump grip? These files are for you.

The new front slide file replaces the entire front slide with one cut down and missing its pump grip.

The new t-pull file replaces the entire t-pull with a flush filler piece.

Pictures attached show what they look like.

Print orientation is the same. (front of the slide on plate, bottom or top of the t-pull on plate, I recommend using supports)

NOTE: The pump grip delete front slide might have catch related issues. The prototype in the photos shows a flush trim matching the rear slide; this caused the entire slide to shift up and not disengage the catch. I have an extra print attached to the front that fixed this issue on the prototype, but as this extra print is completely unrelated to this fileset this fix will not work for everyone. The file currently uploaded has been fixed to address this issue, but depending on your print tolerances and filament choice there might still be flexing present which will prevent firing.

Dan Pistol made by https://www.orionblasters.com

This blaster is currently in beta. Files are subject to change.