Wallrack bracket 12mm/8mm

This bracket is for the use of metal or wood rods as a shelf board on the wallholder

https://www.prusaprinters.org/de/prints/103617-wallrack-holder-multi-use

specs:

• 8mm/12mm outer diameter of the rods
• assembly by: M4x10 and M4x15 with a M4 hexnut each, no washer
• rods can be chosen of any material, no glue! bore is tolerated for press-fit!
• rods shall be cutted by pipe cutter or a normal saw
• deburring recommended
• lenght of the rods shall not exceed 1m
• 0,2mm PETG

Enjoy and like it if you really like it :D

Cheers