Prusa Accelerometer

The Input Shaper functionality on your Original Prusa MK4/S, MK3.9/S or MK3.5/S can be calibrated using an optional accelerometer.

You can find more information about the accelerometer here.

Print instructions

Download the latest PrusaSlicer and use the following settings**:

• Print settings: 0.20mm STRUCTURAL
• Filament: PETG (tested on Prusament)
• 15% Grid infill

**Note that print settings are recommended, but you can experiment with your own. 

The default recommendation for the material is black PETG unless stated otherwise in the part's notes.