Crankbait Fishing Lure
This is my first go at designing a full size printed Crankbait. I think the finished model and results (fish caught) whe
41
202
0
928
updated October 10, 2024
Description
PDFlink to original model https://www.thingiverse.com/thing:1729443
The bait is printed in two halves and then glued together. (I used super glue) Three small pieces of 1.75mm filament are use to aid in aligning the halves while joining. A single piece of wire (I used motorcycle safety wire) is bent (see pictures for shape) to form the loops for tie on and the hook mounts and fits in between the halves before gluing together.
I printed this one with a .25 nozzle and .10 layer height to keep things smooth so your results may vary. After gluing the halves together the only post processing I did was to sand the glue seams flush.
Model origin
The author marked this model as their own original creation.
