I printed with:
- Material: PLA, Carbon
- Carbon filled PLA to achieve higher rigidity. Not reuired, but… because.
- Nozzle: 0.6mm
- Layer height: 0,3mm
- Walls: 2 (+alternate extra wall)
- Top/bottom 3 layers = 0,9mm
- Infill: 30% Cubic
- It may be necessary to enable “Detect thin walls”, “Precise wall” or similar settings in the slicer of choice. Otherwise the two ends may merge.
STL and Fusion 360 files provided.
The author marked this model as their own original creation.