Sovol SV08 Cable Chain V2

I have printed them in Polimaker Galaxy Black ABS and they are perfect!

The chain and the clip can be printed without support but the ends will need support.

Note: if you have bed adhesion problem when printing the clips you can rotate them. see how i have oriented the slim and the wide version. 

you will need between 20-23 chains (i use 22)

Print settings:
0.2 Layer Height
5 Top
5 Bottom
5 Walls
20% infill

BOM
1x M3 Tnut
1x M3 x 8
Plus the original hardware. 

This is the wide version for who wants to use the toolhead cables also we have space for eddy usb cable.

This is the version for who will route the toolhead cables trough the top hat