Paper Form Holder and Display

This is a model I made for my school to display permission slips. It works great keeping things organized and accessible. It's designed to fit a single 8.5x11-inch piece of paper in the front behind a piece of Acrylic and about 1in thick of paper in the back. The curved part of the back along with the lever keeps the papers straight.

The FrontBox was printed with the front slot opening pointing up, and the MountingPlate was printed on its side with the lever parallel to the build plate. 

Material: PLA & PETG

Supports: Tree

The acrylic insert is .08in thick. I've included a DXF and a PDF for cutting on a laser or waterjet. But it can also be cut with a basic saw. The dimensions are 8.75x11.2 Inches