Isofarian Guard Enemy Dashboard-2 Color version 2
Description
PDFPrintable in 2 colors. I have not tested in printing in 1 color, but the numbers are the same height as the cube holes.
Printed at 0.3mm layer height.
2024-10-19 - Added the file TIGEnemyTrackerVersion2-SingleColor.3mf so that the color could be changed using layer height or printed as a single color model. I was unable to boolean mesh the negative parts with the main parts, so I couldn't export as an STL. Sorry, this is the best I can do if you can't use the 2-color version.
Model origin
The author remixed this model.
Differences of the remix compared to the original
Version 2 is inspired by Hextra's board. I recreated the board using Fusion 360 for the cube tracker part and added the rest using Bambu Studio primitive parts. Hopefully it works for other slicers, but I haven't tested with other slicers. You may need to use the fill bucket to paint in the heart, sword, and shield if you want those to have color. The numbers are all separate parts, which can be isolated in the slicer to color.