MK4s Exterior LCD mount for Lack Enclosure

MK4s Exterior LCD mount for Lack Enclosure

Just a quick mounting plate to allow me to screw the MK4s LCD mount on to the front of the Lack Enclosure. 

I used the exisitng screws 4x (3x12sT) which are recessed on the back side of the plate. and the front I just used 2 short #8 drywall screws 

I Wanted to make use of the cable passthrough from the GEN2 Modular Drawers

Fyi the ribbon cable is 2 to 3 inches too short. So I bought the below parts to make a longer cable. This will also allow me to make proper corners and cable management of the ribbon cable.

https://www.digikey.com/en/products/detail/3m/3365-24-100/9479206

https://www.digikey.com/en/products/detail/te-connectivity-amp-connectors/9-215083-4/4486392