Camera Strap Mounted SD Card Holder

A small SD card case that uses magnet to hold it together. It sits snugly on a Peak Design Slide Lite camera strap so you can always have a backup SD card with you.

---

Requires 8x 5x1.7mm Magnets. V2 works without magnets as the fit is nice and snug.

---

Print the top face down.

Print the bottom vertically with supports.

---

Included are two versions:

1. The original design which has a lip on the top part of the case. It's a little bulky but it gets the job done.
2. The revised design with the lip on the bottom of the case and a slightly smaller footprint.