Hultafors HDC chisel holders

The model is really stable, so it can be printed with most types of filament. 

I recommend using PTEG or ASA, with layer height set to 0.10 mm and the setting for “support everywhere” must be turned on.

The size of the magnets to be glued in must be 8 mm in diameter and 2 mm in thickness.

3MF-files to the following chisel sizes is attached: 6, 8, 10, 12, 16, 18, 20, 25, 32, 38 and 40 mm

Other sizes can easily be created as the model file uses parametric design.