Kyosho Landjump / Vanning Replica Radio Box

The Kyosho Landjump Integra was possibly the first 4WD radio control car. Production began in 1981 and they were made almost entirely from aluminum. Driven by chain the car was a monster at a scale of 1/8. The power plant was a .21 IC Nitro engine. It has differentials front and rear, trailing front suspension, semi-trailing rear suspension and a disk brake on the rear differential.

Over the years spare parts have become harder and harder to find. The plastic boxes to hold the electronics are very rare. This rarity drove me to produce replica box. Initially I had them vacuum formed, but now I have modeled it in Fusion 360.

Details about my Kyosho Landjump can be found at Landjump.co.uk

I have made this as close to the originals as I can making only minor changes to help with 3D printing.

Print with your favourite thermoplastic | http://e3d-online.com/All-Filament

If you would like a printed version for your own Landjump or Vanning but do not own, or have access to, a 3D Printer click on Purchase Printed Boxes

I have also designed a replica bumper | https://www.thingiverse.com/thing:3823284

Please help support my work here on Thingiverse and on Instructables by using the following affiliate links when making purchases. Thanks :)

eBay.com | eBay.co.uk | eBay.fr | Amazon.co.uk

Print instructions

Category: R/C Vehicles Print Settings

Printer: E3D's BigBox

Rafts: No

Supports: No

Resolution: 0.25mm

Infill: 15%

Notes:

The Lid can be a little tricky, I recommend printing it slow with 100% Fan. Alternatively use supports, ideally soluble.

How I Designed This