Sipeed NanoKVM Lite Case

The housing consists of two parts. The cap is snap-in. The HDMI and USB-C ports are easily accessible and not recessed into the housing.

The housing has a cutout that allows access to the microSD card without disassembly and holes for observing the diodes

It is best to mount the NanoKVM without the card to avoid breaking it. You should also pay attention to the choke under the HDMI port.

First, insert the USB port side all the way to the bottom. Then push in the Ethernet port side.

UPDATE 2025-01-04

I added a version that was 0.5mm wider.

I added a 5mm higher version to accommodate the dupont plug.