EVKEY MTC10 to AMPS mount hinged

This will allow you to mount the MTC10 on an AMPS mount (screws down from the device side) It also has a hinge to allow for proper tilting.

You will also need:

• 4 pcs M3x12 screws
• 4 pcs M3 washer
• 4 pcs M3 spring washer (grover)
• 1 pcs M4 washer
• 1 pcs M4 nylock nut
• 1 pcs M4x35mm allen key screw
• 4 pcs M4x20mm screws (lenght dependent on AMPS mount)