Better Stronger Screws for Flexible & sturdy phone arm (100% Printed)

The original screws were printed vertically. After using the original screws for a few months, it started to split at the layer lines, so I decided to make these screws, that you can print horizontally on the bed, which also gave it an advantage of usability, as it is easier to screw, cos the flat surface gives better grip. Also need much less infill.

Print Horizontally

PETG is preferred, but PLA works too.

• 20% gyroid infill
• 3 walls
• inner/outer wall order
• No support
• No rafts

Filament used in the pictures:

• CC3D PETG Lime Green

Screws are better, stronger and easier to print.