Hexagonal-patterned watering can v1

This watering can consists of two parts: A hexagonal patterned outer part, and an inner part that fits snugly inside. The dual color model can be printed with a single extruder. However, there is a twist: As the outer part encloses the inset to lock it in place, the inset has to be printed using a flexible material. This allows squeezing it inside:

Step 1:  preparation	Step 2: Fold and squeeze the flexible inset into the outer part	Once fully inserted, the outer part encloses the flexible inset and locks it in place.

If you like the idea of a dual color - dual material - design also check out my other watering can with a Voronoi pattern: https://www.printables.com/model/735686-voronoi-watering-can !

Printing instructions

Outer part ("hexagonal patterned skeleton"):

• use PLA/PETG or similar
• I recommend organic supports
• a printfile sliced at 0.3mm layer height is included

Flexible inset:

• use a Flex material; I used yellow Extrudr Medium TPU (98A)
• no supports required
• 0.3mm layer height