Blackstone Griddle Leveling Shims (1/8")

Leveling shims for your Blackstone.  The original version provides a single size, which gives you a ¼" rise with a wheel.  Each one you stack, though, gives you ½" increase.  I needed ½" total height increase, so I wanted to remix this.  Additionally, with 3D printing, the weight of the wheel would be greatly reliant on the infill.  So I added some holes down the center to provide perimeter walls directly under the wheels for better support.  They also let rain water drain through.

I decided to create variants in 1/8th inch increments to satisfy my OCD.  Not sure they're really necessary, but I was really wanting a 1/8" shim to get my Blackstone perfectly level.

Printing

• Material: recommend PETG or ASA to provide some UV protection
• Layer Height: 0.20mm is what I used, but any should work.
• Perimeters: 3 for a bit of added strength
• Infill: 15% gyroid seemed to work for me

Support

If you like my designs and want to make my day, you can buy me a ☕!

I wanted more height options, plus I added holes down the center to provide solid walls to support the weight.  I also include flat variants to fully support the weight since if you stack the originals, they're only supported around the outside perimeter.