Prusa Enclosure Hexagon Colored parts

Prusa Enclosure Door Hinges and Magnet Parts.

With or without MMU

If you want to print the files with the MMu, use the color tool in the slicer, or use the finished gcode files.

________________________________________________________________________________________________________________

______________________________________________________________________________________________________________________________

In order to use this file without the MMU, you have to change the number to 2 in Prusa slicer under printer/ general/ extruder. 

“Check this at Custom G-Code: M600 G1 E0.3 F1500 ; prime after color change "

Now you can insert files 1/2 (Non MMU folder)and choose which part should get which color.   When printing starts, color 1 is printed completely, then the printer moves to the pause position and waits for a filament change. 

Now the printer will finish printing the rest of the file with the new color.

Colored the Hexagons in the Door-Hinges