Aluminum extrusion Linear Rod mod

As a part of my project to port over the Qidi X-Plus to my TronXY X5SA, I couldn't find the OEM corner mounting brackets anywhere (I searched VERY hard on the interwebs). Qidi was nice enough to send me 4 brackets which I measured thoroughly with my digital calipers and designed on OnShape.

The slight differences here are the structure rafts on each side are no longer there, and the 10mm linear rod spot being a few mm off (1.5 vs 2mm OEM). The mounting holes are now 5mm bolts, rather than the 2mm bolts. I've included the 2mm bolt version if you prefer. 

Note: The 2mm bolt version requires threaded inserts.

If you enjoy this build, please consider downloading, liking, and following for future updates.

Print: PETG, 30%