Haute42 Buttons

Buttons for the Haute42 S16 and S13 controllers.  The buttons in the image were printed on a Bambu X1C with fine settings at .2mm layer height.  Added a slit to help removal of buttons with a keycap puller.

With the X1C, the buttons were able to press in tightly, but still able to be removed fairly easily.  Try fitting on a removed keycap, if its too tight, i've included the original models so you can adjust tolerances on the stem width / length, and inner fillet radius.

Includes the following files:

• 2 STEPs Files: 23.2mm and 26.6mm buttons
• Original Freecad files, along with parameters to adjust tolerances if needed.