TinaTina - 90mm brushless drone frame (1103/20x20mm)

A mini brushless drone frame (90mm from motor to motor) that doesn't need any screws - everything is held together with zip ties. The frame is ready for standard 20x20mm flight stacks such as HGLRC Micro F4 V2 and similar.

The frame comes with a detachable FPV camera holder. The battery is mounted on the top of the frame.

To learn more about this project and see the assembly process, please visit https://www.prusaprinters.org/how-to-build-a-3d-printed-micro-drone/

And watch the video! :)

Print instructions

Printed at 0.15 or 0.20 mm, no supports needed