mario argentina.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 150x150mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 3.1mm and the Actual Depth is 3.2mm
Filaments Used:
PLA smartfil negro Transmission Distance: 0.4
PLA smartfil marron Transmission Distance: 5
PLA smartfil azul oscuro Transmission Distance: 3
PLA smartfil azul Transmission Distance: 1.8
PLA smartfil naranja Transmission Distance: 1.2
PLA smatfil amarillo Transmission Distance: 5.8
PLA smartfil White Transmission Distance: 6
This print uses 7 unique filaments
Swap Instructions:
Start with negro
At layer #12 (1.04mm) swap to marron
At layer #13 (1.12mm) swap to azul oscuro
At layer #20 (1.68mm) swap to azul
At layer #29 (2.4mm) swap to naranja
At layer #30 (2.48mm) swap to amarillo
At layer #33 (2.72mm) swap to White for the rest.
The author marked this model as their own original creation.