Joe

@IamJoe

I bought a Bosch Klein toolbox for my son. He is heavily using the bolts and nuts so I decided to print a few more.…

513

1713

updated February 18, 2026

Ervin

@Ervin

Printed one more in competitors colour

Ray

@TheOneRay

Very good thank you Buddy

F 6

Ficus

@Ficus_2421537

Replace missing nut . . . check

Thank you for sharing <3

K 14

k8y3d

@k8y3d_1348362

@LOOTY_169812 how did you make the holes in the board? I want to do something similar from plywood as printing it would not be economical

LOOTY

@LOOTY_169812

@k8y3d_1348362 Drill a hole that is slightly smaller than the diameter of the hexagon, and hammer the nut into the plate using a piece of wood and a hammer.

View one more comment

RyanMac

@RyanMac

Printed at 0.3 layer height and used supports for the overhang of the bolt. Scaled up to 150% for my 2 year old to play with, it’s a little stiff for him to turn with his hands though, could do with being a littler loser.

Johannes E

@JohannesE

hmm the thread doesn't exactly fit the original one: my original screw has exactly 11,5 rotations on a 40mm length, your model has only ~10 rotations... But thanks for sharing the Fusion Files, so I could easily change it :)

Edit: Thanks for the uploaded the fixed version :-) (edited)