Bathroom Organizer

Beard care organizer/Bathroom organizer 

   ---Print Directions--

Supports - ON (I left square cutouts in the bottom for rubber feet *optional*Link below)

Brim - I would (Up to your machine)

Nozzle Temp- Depends on filament (I used Overture PETG at 240c)

Bed Temp- Depends on filament (I used Overture PETG at 80c)

Extra Bed Adhesion- I used hairspray- I will be trying glue sticks moving forward for PETG (The purple sticks)

   ---Notes---

I did get some curling on the corners I would recommend using a brim, but you know your machine better than I do. 

Rubber Feet Cutouts- leave supports on- After cleaning these out they should fit the rubber feet linked below

Rubber Feet- https://www.amazon.com/dp/B085DMB1XV?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1

Beard Wax Tin Storage Metal Dowels - I left 3/16 sized holes around the tin storage location- These are intended for 4 dowels- The intention is to apply a small bit of glue to the hole heat the dowels and slide them in. I am waiting for these to arrive. If this doesn't work I will update this model- You can use whatever metal you prefer- I am going with brass. Copper, Bronze, Stainless steel would also be cool alternatives. 

Brass Dowels- https://www.amazon.com/dp/B09TDCB7FT?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1