Magnetic Markers for 3D Scanning

Some variants of differently shaped magnetic markers for 3D scanning.

The provided STLs are made for disc magnets of the size 10 x 3 mm and do need a pause command to manually insert them during the print (the 3MF file already includes this pause).

I used the markers from my Revopoint scanner which are 10 mm in diameter, like these ones.

The size of the magnets and reflecting marker dots are customizable in Fusion 360 using its parameters feature:

Additional parts required:

• 10 x 3 mm disc magnets
• 10 mm reflective markers (6 mm dot size)

You may are also interested in my "Customizable Turntable Plate" for which I mainly use it for.
I you already printed the turntable, make sure you insert the magnets the correct way around so that they attract and not repel each other.

Support my work

For non-Prusa parts and filaments, check out 3DJake (International, UK, Germany, France).
I'll get a small cut of any order you fulfil using these links (at no additional cost for you 😉).

If you want to support my work directly, you can buy me a coffee.

If you want to order a Prusa printer and earn some Prusameters (I will also get some), you can use my referral code "@whity" at checkout or click one of the following links
(the code only works for the first order of each printer model):
| MK4 | MK4 Kit | MINI+ | MINI+ Kit | XL | SL1S | SL1S+CW1S |

Also check out my other models.