UMSS - Boxe with divisions

Disclaimer: These and other models are available to all "my club" members starting at $5 per month, as well as for one-time purchase. Your support helps sustain the development efforts and the acquisition of modules. Thank you very much!

Introduction

These modules are part of the UMSS project. The project should therefore start there, with the creation and integration of tiles, eventually creating boxes and other items. These "containers" will hold these modules, which serve various purposes. In this case, they are tools and accessories that are available to all printers.

First and foremost, it is important to clarify that the box with the 150x150mm tile. that you will find at UMSS - Universal Modular Storage System is merely an example. You are free to use it as you see fit; for instance, you can use multiple 150x150mm boxes to store several duplicates of the same piece, or you can use a larger box by utilizing composite tiles, like the 210x180 tile that allow you to use almost all the space you have on the build plate of your mk4, 3 and 2 series printer.

Box modules available:

• 5x2 Box - External dimensions approx. 150x60mm and approx. 144x53mm
  • 8 divisions that can be configured

Printing

• The lid with hinge is a print-in-place and works perfectly, very smooth, staying in place when printed with normal PLA or PETG (I don't recommend on using matte PLA on this component).
• Regarding printing, everything is quite simple as everything is pre-configured. You will find modules with pockets for magnets of 6.1 and 6.2mm. Choose the dimension that best suits your needs, keeping in mind that various factors can cause the magnet to not fit properly or be too loose. The magnet should fit with some pressure and then should not come out; if it does, use a small amount of glue at the base of the pocket. For more information on this, please visit the main page of this project here: UMSS - Universal Modular Storage System.
  • In the case of the 2 magnets that make the lid, you will need to glue it, otherwise overtime they will come out.
• As always, if you know how to do it, please calibrate the material (flow rate / dynamics) 

Other Boxes

UMSS - Boxes with Lid

Support the designer:

This design is free for the benefit of the community, but If you like my designs and want to contribute, you can make a donation to buymeacoffee  or paypal, or even better, join “My Club” here in printables.com, that will be greatly appreciated.